Difference between revisions of "Raphael Digital Documentation Setup"

From National Gallery Research Wiki
Jump to navigation Jump to search
Line 15: Line 15:
  
 
== Vips/Nip software ==
 
== Vips/Nip software ==
 
Open up an xterm window and run the following commands
 
sudo mkdir /usr/local/vips-7.22
 
sudo ln -s /usr/local/vips-7.22 /usr/local/vips
 
  
 
Add the following lines to end of your .bashrc file
 
Add the following lines to end of your .bashrc file
Line 27: Line 23:
 
  export PKG_CONFIG_PATH=/usr/lib/pkgconfig:/usr/lib32/pkgconfig:/usr/share/pkgconfig:$VIPSHOME/lib/pkgconfig
 
  export PKG_CONFIG_PATH=/usr/lib/pkgconfig:/usr/lib32/pkgconfig:/usr/share/pkgconfig:$VIPSHOME/lib/pkgconfig
  
Close your existing xterm and open a new one (this ensures your .bashrc edits are considered) and prepare to download the source code
+
Open up a new xterm window and run the following commands
 +
sudo mkdir /usr/local/vips-7.22
 +
sudo ln -s /usr/local/vips-7.22 /usr/local/vips
 +
 
 +
Prepare to download the source code
 
  mkdir software
 
  mkdir software
 
  mkdir software/vips
 
  mkdir software/vips
Line 49: Line 49:
 
  make
 
  make
 
  sudo make install
 
  sudo make install
 +
 +
Test the software has been installed correctly
 +
cd
 +
nip2
  
 
== IIPImage system ==
 
== IIPImage system ==

Revision as of 18:57, 23 November 2010

The software referred to here was produced as a prototype digital documentation system within the Mellon funded Raphael Research project. The software was built to test various ideas related to the storage, dissemination and description of museum/gallery related information.

The instruction listed here describe the steps required to set up an empty copy of the system for personal use. As stated the software is classed as prototype or beta software and further develop work would be recommended prior to making use of it for anything more than testing and development purposes.

This page is part of the Linux Setup discussion.

--Jpadfield 13:00, 23 November 2010 (UTC)


Initial set-up of your Linux machine

Follow the instructions and install the software indicated in the following to sections:

Vips/Nip software

Add the following lines to end of your .bashrc file

export VIPSHOME=/usr/local/vips
export MANPATH=$MANPATH:$VIPSHOME/man
export PATH=$VIPSHOME/bin:"${PATH}"
export LD_LIBRARY_PATH=/usr/local/lib:$VIPSHOME/lib
export PKG_CONFIG_PATH=/usr/lib/pkgconfig:/usr/lib32/pkgconfig:/usr/share/pkgconfig:$VIPSHOME/lib/pkgconfig

Open up a new xterm window and run the following commands

sudo mkdir /usr/local/vips-7.22
sudo ln -s /usr/local/vips-7.22 /usr/local/vips

Prepare to download the source code

mkdir software
mkdir software/vips
cd  software/vips

Download and unpack the current version of vips and nip2, for example:

wget  http://www.vips.ecs.soton.ac.uk/supported/7.22/vips-7.22.5.tar.gz
wget  http://www.vips.ecs.soton.ac.uk/supported/7.22/nip2-7.22.4.tar.gz
tar xzvf vips-7.22.5.tar.gz
tar xzvf nip2-7.22.4.tar.gz

Move into the vips folder and build the software as indicated:

cd vips-7.22.5
configure --prefix=/usr/local/vips-7.22
make
sudo make install

Move into the nip2 folder and build the software as indicated:

cd ../nip2-7.22.4
configure --prefix=/usr/local/vips-7.22
make
sudo make install

Test the software has been installed correctly

cd
nip2

IIPImage system

MySQL database

Check default directories and settings

Web front end